Round above ground:
Amazone and Boreale (available at Club Piscine)
Savanna (available at Sima)
Amazone and Boreale Components
Structural panels
- Copper-azole-treated yellow pine – Amazone only
- ACQ-treated red pine – Boreale only
- Width: 4’ (1.20 m)
- Height of walls: 52” (1.32 m)
- Factory-preassembled with planks mortise and tenon moulded.
Boreale: grooved planks roughly 4” (10 cm) wide
Amazone: plain planks roughly 3 ½” (8.75 cm) wide.
Wall panels
- Flexible
- Their number determines the size of the pool
Columns
- Made of 100 % wood, sturdy and attractive
- Handcrafted at the factory then assembled with glue and screws
Amazone: yellow pine
Boreale: red pine
Borders
- Made of 100 % wood, 9” (23 cm) wide
Seat caps
- Made of antiskid injected resin, very easy to install

- Column
- Wood Border
- Seat cap
Fastener cover
- Attractive and safe
Cables
- Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
- Plastic coated for a sleek appearance and for protection from chemicals and salt
- Cable breaking point: 9,800 lbs.

- Fastener cover
- Cables
Insulation
- Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner
Liner
- Vinyl liner secured with a standard in ground pool fastening system, factory installed
Packaging
- Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool
Important notice: Amazone models are not designed for semi-inground installation. Installing an Amazone model semi-inground could affect the pool’s warranty.
Savanna Components
Structural panels
- Copper-azole-treated yellow pine
- Width: 4’ (1.22 m)
- Factory-assembled with plain planks roughly 3½” (8.75 cm) wide, mortise and tenon moulded
- Height of walls: 52” (1.32 m)
Round wall panels
- Flexible
- Their number determines the size of the pool
Columns
- Sturdy columns for borders made of injected resin
Borders (Top Rails)
- Rounded forms made of talc-filled resin 7” (17.5 cm) wide
- Easy to install
Seat caps
- Sleek, made of injected resin and easy to install

- Column
- Resin Border
- Seat cap
Fastener cover
- Attractive and safe
Cables
- Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
- Plastic coated for a sleek appearance and for protection from chemicals and salt
- Cable breaking point: 9,800 lbs.

- Fastener cover
- Cable
Insulation
- Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner
Liner
- Vinyl liner secured with a standard in ground pool fastening system, factory installed
Packaging
- Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool
Rail system
Aqua-Wood has designed an injected resin rail system.
The rails are easy to assemble. They are 3” wide at the base, and therefore provide very solid support for the pool panels, while also making the task of wall assembly easier.
This system also makes it possible to assemble the pool without using cement blocks as a foundation.
The ground preparation method is therefore identical to conventional round above ground pools.
Offered as an option.

- Rail system
Important notice: This model is not designed for semi-inground installation. Installing this model semi-inground could affect the pool’s warranty.